HP Elite x2 G8 Скачать руководство пользователя страница 63

Страница: 63 / 184

Reverse this procedure to install the WWAN module.

POGO connector

To remove and disassemble the POGO connector, use these procedures and illustrations.

Table 6-7

POGO connector descriptions and part numbers

Description

Spare part number

POGO connector and cable

L67422-001

IMPORTANT:

Be sure to use the correct size screwdriver to avoid stripping the screw.

Before removing the POGO connector and cable, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 40

Remove the display panel (see

Display panel on page 42

Remove the battery (see

Battery on page 46

Remove the POGO connector and cable:

Disconnect the POGO cable from the ZIF connector on the system board (1).

Remove the two Phillips M1.4 × 2.5 screws (2).

Peel the cable up to disengage the adhesive that secures it to the computer (3), and then remove the

POGO connector from the computer (4).

Reverse this procedure to reassemble and replace the POGO connector.

Camera module

To remove the camera module, use these procedures and illustrations.

POGO connector

Содержание Elite x2 G8

























































































































































































Результаты поиска

Содержание Elite x2 G8

Отзывы:

HP Elite x2 G8, Руководство по техническому обслуживанию и ремонту, Страница: 63 / 184

Результаты поиска

Содержание Elite x2 G8

Отзывы: