HP Elite x2 G8 Скачать руководство пользователя страница 16

Страница: 16 / 184

Table 2-1

Right-side components and their descriptions (continued)

Component

Description
Connect a USB device, provide high-speed data transfer, and

charge small devices (such as a smartphone), even when the

computer is off.

NOTE:

Use a standard USB Type-C charging cable or cable

adapter (purchased separately) when charging a small external

device.

– and –

Connect a display device that has a USB Type-C connector,

providing DisplayPort output.

NOTE:

Your computer might also support a Thunderbolt

docking station.

NOTE:

Cables and/or adapters (purchased separately) might

be required.

(3)

USB Type-C power connector port, SuperSpeed

port, and DisplayPort™ connector

Connects an AC adapter that has a USB Type-C connector,

supplying power to the computer and, if needed, charging the

computer battery.

– and –

Connects a USB device, provides high-speed data transfer,

and (for select products) charges small devices (such as a

smartphone) when the computer is on or in Sleep mode.

NOTE:

Use a standard USB Type-C charging cable or cable

adapter (purchased separately) when charging a small external

device.

– and –

Connects a DisplayPort device that has a USB Type-C connector,

providing display output.

NOTE:

Cables and/or adapters (purchased separately) might

be required.

(4)

Battery light

When AC power is connected:

●

White: The battery charge is greater than 90 percent.

●

Amber: The battery charge is from 0 to 90%.

●

Off: The battery is not charging.

When AC power is disconnected (battery not charging):

●

Blinking amber: The battery has reached a low battery

level. When the battery has reached a critical battery level,

the battery light begins blinking rapidly.

●

Off: The battery is not charging.

Left

Use the illustration and table to identify the components on the left side of the computer.

Chapter 2 Components

Содержание Elite x2 G8

























































































































































































Результаты поиска

Содержание Elite x2 G8

Отзывы:

HP Elite x2 G8, Руководство по техническому обслуживанию и ремонту, Страница: 16 / 184

Результаты поиска

Содержание Elite x2 G8

Отзывы: