HP Elite c645 G2 Chromebook страница 69 Скачать руководство пользователя

Страница: 69 / 81

Statement of memory volatility

For general information regarding nonvolatile memory in HP business computers, and to restore nonvolatile

memory that can contain personal data after the system has been turned off and the hard drive has been

removed, use these instructions.

HP business computer products that use Intel®-based or AMD®-based system boards contain volatile DDR

memory. The amount of nonvolatile memory present in the system depends upon the system configuration.

Intel-based and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped

from HP, with the following assumptions:

●

No subsequent modifications were made to the system.

●

No applications, features, or functionality were added to or installed on the system.

Following system shutdown and removal of all power sources from an HP business computer system,

personal data can remain on volatile system memory (DIMMs) for a finite period of time and also remains

in nonvolatile memory. Use the following steps to remove personal data from the computer, including the

nonvolatile memory found in Intel-based and AMD-based system boards.

NOTE:

If your tablet has a keyboard base, connect to the keyboard base before beginning steps in this

chapter.

Current BIOS steps

Use these instructions to restore nonvolatile memory.

Follow these steps to restore the nonvolatile memory that can contain personal data. Restoring

or reprogramming nonvolatile memory that does not store personal data is neither necessary nor

recommended.

Turn on or restart the computer, and then quickly press

esc

NOTE:

If the system has a BIOS administrator password, type the password at the prompt.

Select Main, select Apply Factory Defaults and Exit, and then select Yes to load defaults. The

computer restarts.

During the restart, press

esc

while the "Press the ESC key for Startup Menu" message is displayed at

the bottom of the screen.

NOTE:

If the system has a BIOS administrator password, type the password at the prompt.

Select the Security menu, select Restore Security Settings to Factory Defaults, and then select Yes

to restore security level defaults. The computer reboots.

During the reboot, press

esc

while the "Press the ESC key for Startup Menu" message is displayed at

the bottom of the screen.

NOTE:

If the system has a BIOS administrator password, type the password at the prompt.

Chapter 8 Statement of memory volatility

Содержание Elite c645 G2 Chromebook


















































































Результаты поиска

Содержание Elite c645 G2 Chromebook

Отзывы:

Похожие инструкции для Elite c645 G2 Chromebook

Бренды по названию

Популярные бренды

HP Elite c645 G2 Chromebook, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Elite c645 G2 Chromebook

Отзывы:

Похожие инструкции для Elite c645 G2 Chromebook

Бренды по названию

Популярные бренды