2.
Remove the lock bracket from the computer (2).
To install the lock bracket, reverse this procedure.
Card reader
To remove the card reader, use this procedure and illustration.
Table 5-11
Card reader description and part number
Description
Spare part number
Card reader
N12914-001
Card reader cable
N18575-001
Card reader bracket (available in the Bracket Kit)
N18576-001
Card reader insert (available in the Miscellaneous Parts Kit
N14812-001
Before removing the card reader, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 28
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the card reader:
1.
Disconnect the cable from the ZIF connector on the card reader board (1).
2.
Remove the four Phillips M2.0 × 3.0 screws (2) that secure the card reader bracket to the computer.
42
Chapter 5 Removal and replacement procedures for authorized service provider parts