HP E4510-48G, Справочник по командам

Страница: 874 / 1334

3-4
Default Level
1: Monitor Level
Parameters
ring-group-id : RRPP ring group ID, in the range 1 to 8.
Description
Use the display rrpp ring-group command to display the RRPP ring group configuration. If no ring
group ID is specified, the configuration of all ring groups is displayed. If an RRPP ring ID is specified,
the configuration of the specified RRPP ring group on the current device is displayed. For an edge
node RRPP ring group, the subring sending Edge-Hello packets is also displayed.
Related commands: domain ring .
Examples
# Display the configuration of all RRPP ring groups.
<Sysname> display rrpp ring-group
Ring Group 1:
domain 1 ring 1 to 3, 5
domain 2 ring 1 to 3, 5
domain 1 ring 1 is the sending ring
Ring Group 2:
domain 1 ring 4, 6 to 7
domain 2 ring 4, 6 to 7
Table 3-2 display rrpp ring-group command output description
Field Description
Ring Group 1 RRPP ring group 1.
domain 1 ring 1 to 3, 5
Subrings in the ring group, including rings 1, 2, 3, and 5 in RRPP
domain 1.
domain 1 ring 1 is the
sending ring
The sending ring of the ring group is ring 1 in RRPP domain 1.
display rrpp statistics
Syntax
display rrpp statistics domain domain-id [ ring ring-id ]
View
Any view
Default Level
1: Monitor level