HP E4510-48G, Справочник по командам

Страница: 828 / 1334

14-9
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] description This acl is used in geth 1/0/1
display acl
Syntax
display acl { acl-number | all | name acl-name }
View
Any view
Default Level
1: Monitor level
Parameters
acl-number : IPv4 ACL number, which must be in the following ranges:
z
2000 to 2999 for basic IPv4 ACLs
z
3000 to 3999 for advanced IPv4 ACLs
z
4000 to 4999 for Ethernet frame header ACLs
all : Specifies all IPv4 ACLs.
name acl-name : Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be the English word of all to avoid confusion.
Description
Use the display acl command to display information about a specified IPv4 ACL or all IPv4 ACLs.
Note that this command displays ACL rules in the match order.
Examples
# Display information about IPv4 ACL 2001.
<Sysname> display acl 2001
Basic ACL 2001, named flow, 1 rule,
ACL's step is 5
rule 5 permit source 1.1.1.1 0 (5 times matched)
rule 5 comment This rule is used in geth 1/0/1
Table 14-3 display acl command output description
Field Description
Basic ACL 2001
The displayed information is about basic IPv4 ACL
2001.
named flow The name of the ACL is flow.
1 rule The ACL contains one rule.
ACL's step is 5 The rule numbering step is 5.
5 times matched
There have been five matches for the rule. Only ACL
matches performed by software are counted.
This field is not displayed when no match is found.