HP E4510-48G, Справочник по командам

Страница: 801 / 1334

12-3
Description
Use the close-mode wait command to set the SSL connection close mode to wait. In this mode, after
sending a close-notify message to a client, the server does not close the connection until it receives a
close-notify message from the client.
Use the undo close-mode wait command to restore the default.
By default, an SSL server sends a close-notify alert message to the client and close the connection
without waiting for the close-notify alert message from the client.
Related commands: display ssl server-policy .
Examples
# Set the SSL connection close mode to wait mode.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] close-mode wait
display ssl client-policy
Syntax
display ssl client-policy { policy-name | all }
View
Any view
Default Level
1: Monitor level
Parameters
policy-name : SSL client policy name, a case-insensitive string of 1 to 16 characters.
all : Displays information about all SSL client policies.
Description
Use the display ssl client-policy command to view information about a specified or all SSL client
policies.
Examples
# Display information about SSL client policy policy1.
<Sysname> display ssl client-policy policy1
SSL Client Policy: policy1
SSL Version: SSL 3.0
PKI Domain: 1
Prefer Ciphersuite:
RSA_RC4_128_SHA