HP E4510-48G, Справочник по командам

Страница: 771 / 1334

10-28
undo sftp client source
View
System view
Default Level
3: Manage level
Parameters
ip ip-address : Specifies a source IPv4 address.
interface interface-type interface-number : Specifies a source interface by its type and number.
Description
Use the sftp client source command to specify the source IPv4 address or interface of an SFTP
client.
Use the undo sftp source-interface command to remove the configuration.
By default, a client uses the IP address of the interface specified by the route to access the SFTP
server.
Related commands: display sftp client source .
Examples
# Specify the source IP address of the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
sftp ipv6
Syntax
sftp ipv6 server [ port-number ] [ identity-key { dsa | rsa } | prefer-ctos-cipher { aes128 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] *
View
User view
Default Level
3: Manage level
Parameters
server : IPv6 address or host name of the server, a case-insensitive string of 1 to 46 characters.
port - number : Port number of the server, in the range 0 to 65535. The default is 22.
identity-key : Specifies the algorithm for publickey authentication, either dsa or rsa . The default is dsa .
prefer-ctos-cipher : Preferred encryption algorithm from client to server, defaulted to aes128 .
z
aes128 : Encryption algorithm aes128-cbc.