HP E4510-48G, Справочник по командам

Страница: 691 / 1334

3-17
Default Level
2: System level
Parameters
seconds : HWTACACS server response timeout period in seconds. It ranges from 1 to 300 and defaults
to 5.
Description
Use the timer response-timeout command to set the HWTACACS server response timeout timer.
Use the undo timer command to restore the default.
As HWTACACS is based on TCP, the timeout of the server response timeout timer and/or the TCP
timeout timer will cause the device to be disconnected from the HWTACACS server.
Related commands: display hwtacacs .
Examples
# Set the HWTACACS server response timeout timer to 30 seconds for HWTACACS scheme hwt1 .
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30
user-name-format (HWTACACS scheme view)
Syntax
user-name-format { keep-original | with-domain | without-domain }
View
HWTACACS scheme view
Default Level
2: System level
Parameters
keep-original : Sends the username to the HWTACACS server as it is input.
with-domain : Includes the ISP domain name in the username sent to the HWTACACS server.
without-domain : Excludes the ISP domain name from the username sent to the HWTACACS server.
Description
Use the user-name-format command to specify the format of the username to be sent to a
HWTACACS server.
By default, the ISP domain name is included in the username.
Note that:
z
A username is generally in the format of userid@isp-name, of which isp-name is used by the
device to determine the ISP domain to which a user belongs. Some earlier HWTACACS servers,
however, cannot recognize a username including an ISP domain name. Before sending a
username including a domain name to such a HWTACACS server, the device must remove the