HP E4510-48G, Справочник по командам

Страница: 590 / 1334

2-3
Default Level
2: System Level
Parameters
import-value-list : List of input parameters, in the range of 0 to 7.
export-value : Output parameter in the mapping table, in the range of 0 to 2.
all : Removes all the parameters in the priority mapping table.
Description
Use the import command to configure entries for a priority mapping table, that is, to define one or
more mapping rules.
Use the undo import command to restore specific entries of a priority mapping table to the default.
Note that, you cannot configure to map any DSCP value to drop precedence 1.
Related commands: display qos map-table .
Examples
# Configure the 802.1p precedence-to-drop precedence mapping table to map 802.1p precedence 4
and 5 to drop precedence 1.
<Sysname> system-view
[Sysname] qos map-table dot1p-dp
[Sysname-maptbl-dot1p-dp] import 4 5 export 1
Port Priority Configuration Commands
qos priority
Syntax
qos priority priority-value
undo qos priority
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
priority-value : Port priority to be configured. This argument is in the range 0 to 7.
Description
Use the qos priority command to set the port priority for a port.
Use the undo qos priority command to restore the default port priority.
By default, the port priority is 0.