HP E4510-48G, Справочник по командам

Страница: 582 / 1334

1-19
Green Action: pass
Red Action: discard
Yellow Action: pass
Green : 0(Packets)
Table 1-7 display qos policy interface command output description
Field Description
Interface Port name, comprising of port type and port number
Direction Direction of the port where the policy is applied
Policy Name and configuration information of the policy
Classifier
Name and configuration information of the class
Failed indicates that the policy is not successfully applied
Operator Logical relationship among the classification rules in a class
Rule(s) Classification rules in the class
Behavior Name and configuration information of the behavior
display qos vlan-policy
Syntax
display qos vlan-policy { name policy-name | vlan [ vlan-id ] } [ slot slot-number ] [ inbound ]
View
Any view
Default Level
1: Monitor level
Parameters
name policy-name : Specifies to display the information about the VLAN policy with the specified name,
a case-sensitive string of 1 to 31 characters. No spaces are allowed in a VLAN policy name.
vlan vlan-id : Specifies to display the information about the VLAN policy applied to the specified VLAN.
If no VLAN ID is specified, the VLAN policy information of all VLANs is displayed.
slot-number : Specifies to display VLAN QoS policy information about the specified device in the IRF. If
the slot-number argument is not specified, the VLAN QoS policy information of all devices in the IRF is
displayed. If no IRF is formed, the VLAN QoS policy information of the current device is displayed. The
range for the slot-number argument depends on the number of devices and the numbering of the
devices in the IRF.
Description
Use the display qos vlan-policy command to display the information about VLAN QoS policies.
Examples
# Display the information about the VLAN QoS policy test .
<Sysname> display qos vlan-policy name test