HP E4510-48G, Справочник по командам

Страница: 471 / 1334

5-6
Field Description
Default route
z
Only/Originate: Only means that the interface advertises only the default
route. Originate means that the default route and other RIPng routes are
advertised.
z
Off indicates that no default route is advertised or the garbage-collect time
expires after the default route advertisement was disabled.
z
In garbage-collect status: With default route advertisement disabled, the
interface advertises the default route with metric 16 during the
garbage-collect time.
Summary address The summarized IPv6 prefix and the summary IPv6 prefix on the interface
display ripng route
Syntax
display ripng process-id route
View
Any view
Default Level
1: Monitor level
Parameters
process-id : RIPng process ID, in the range of 1 to 65535.
Description
Use the display ripng route command to display all RIPng routes and timers associated with each
route of a RIPng process.
Examples
# Display the routing information of RIPng process 100.
<Sysname> display ripng 100 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::200:5EFF:FE04:B602 on Vlan-interface100
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec
Dest 3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec