HP E4510-48G, Справочник по командам

Страница: 1315 / 1334

21-3
+4 4 1 disable
--------------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
Table 21-2 display irf configuration command output description
Field Description
MemberID
Member ID
z
The ID with * indicates that the device is the master;
z
The ID with + indicates that it is the device through which the users
logs in to the IRF.
NewID The member ID configured for a device after its reboot
IRF-Port1
The physical IRF port number corresponding to IRF port 1 of a device
after its reboot. (If it displayed in the format of
x , it indicates that IRF port
1 is bound to physical IRF port x; if it is displayed in the format of x,y , it
indicates that IRF port 1 is aggregated by physical IRF ports x and y; if it
is displayed as
disable , it indicates that IRF port 1 is not enabled.)
IRF-Port2
The physical IRF port number corresponding to IRF port 2 of a device
after its reboot. (If it displayed in the format of
x , it indicates that IRF port
2 is bound to physical IRF port x; if it is displayed in the format of x,y , it
indicates that IRF port 2 is aggregated by physical IRF ports x and y; if it
is displayed as
disable , it indicates that IRF port 2 is not enabled.)
display irf topology
Syntax
display irf topology
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display irf topology command to display the topology information of the current IRF.
The command displays all the topology information learned by the current device.
Examples
# Display the topology information of the current IRF.
<Sysname> display irf topology
Topology Info
-----------------------------------------------------------------------
IRF-Port1 IRF-Port2