HP E4510-48G, Справочник по командам

Страница: 1285 / 1334

20-21
z
When you execute the undo cluster enable command on a member device, you disable the
cluster function on the device, and the device leaves the cluster.
z
When you execute the undo cluster enable command on a device that belongs to no cluster, you
disable the cluster function on the device.
Examples
# Enable the cluster function.
<Sysname> system-view
[Sysname] cluster enable
cluster switch-to
Syntax
cluster switch-to { member-number | mac-address mac-address | administrator | sysname
member-sysname }
View
User view
Default Level
0: Visit level
Parameters
member-number : Number of a member device in a cluster, in the range 1 to 31.
mac-address mac-address : MAC address of a member device, in the format of H-H-H.
administrator : Switches from a member device to the management device.
sysname member-sysname : System name of a member device, a string of 1 to 32 characters.
Description
Use the cluster switch-to command to switch between the management device and member devices.
Examples
# Switch from the operation interface of the management device to that of the member device
numbered 6 and then switch back to the operation interface of the management device.
<aaa_0.Sysname> cluster switch-to 6
<aaa_6.Sysname> quit
<aaa_0.Sysname>
# Enter the member device numbered 5 with the system name of switcha .
<aaa_0.Sysname> cluster switch-to sysname switcha
SN Device MAC Address Status Name
5 Switch 4200G 000f-e200-5101 UP test_5.switch
6 Switch 4200G 000f-e200-5102 UP test_6.switch
press SN number to switch to the device, other number will quit the command: 5
<aaa_5.switcha>