HP E4510-48G, Справочник по командам

Страница: 1280 / 1334

20-16
cluster-name : Name of an existing cluster, a string of 1 to 8 characters, which can only be letters,
numbers, subtraction sign (-), and underline (_).
Description
Use the administrator-address command to add a candidate device to a cluster.
Use the undo administrator-address command to remove a member device from the cluster.
By default, a device belongs to no cluster.
Note that:
z
The administrator-address command is applicable on candidate devices only, while the undo
administrator-address command is applicable on member devices only.
z
You are recommended to use the delete-member command on the management device to
remove a cluster member from a cluster.
Examples
# Remove a member device from the cluster.
<aabbcc_1.Sysname> system-view
[aabbcc_1.Sysname] cluster
[aabbcc_1.Sysname-cluster] undo administrator-address
auto-build
Syntax
auto-build [ recover ]
View
Cluster view
Default Level
2: System level
Parameters
recover : Automatically reestablishes communication with all the member devices.
Description
Use the auto-build command to establish a cluster automatically.
Note that:
z
This command can be executed on a candidate device or the management device.
z
If you execute this command on a candidate device, you will be required to enter the cluster name
to build a cluster. Then the system will collect candidates and add the collected candidates into
the cluster automatically.
z
If you execute this command on the management device, the system will collect candidates
directly and add them into the cluster automatically.
z
The recover keyword is used to recover a cluster. Using the auto-build recover command, you
can find the members that are currently not in the member list and add them to the cluster again.