HP E4510-48G, Справочник по командам

Страница: 126 / 1334

4-14
Description
Use the display stp tc command to view the statistics of TC/TCN BPDUs received and sent by all
ports in an MSTI or all MSTIs.
Note that:
z
If you do not specify an MSTI ID, this command will display the statistics of TC/TCN BPDUs
received and sent by all ports in all MSTIs. The displayed information is sorted by instance ID and
by port name in each MSTI.
z
If you specify an MSTI ID, this command will display the statistics of TC/TCN BPDUs received and
sent by all ports in the specified MSTI, in port name order.
Examples
# View the statistics of TC/TCN BPDUs received and sent by all ports on the IRF member device 1 in
MSTI 0.
<Sysname> display stp instance 0 tc slot 1
-------------- STP slot 1 TC or TCN count -------------
MSTID Port Receive Send
0 GigabitEthernet1/0/1 6 4
0 GigabitEthernet1/0/2 0 2
Table 4-9 display stp tc command output description
Field Description
MSTID MSTI ID
Port Port name
Receive Number of TC/TCN BPDUs received on each port
Send Number of TC/TCN BPDUs sent by each port
instance
Syntax
instance instance-id vlan vlan-list
undo instance instance-id [ vlan vlan-list ]
View
MST region view
Default Level
2: System level
Parameters
instance-id : MSTI ID. The minimum value is 0, representing the CIST, and the maximum value is 32.
vlan vlan-list : Specifeis a VLAN list in the format of vlan-list = { vlan-id [ to vlan-id2 } &<1-10> , in which
vlan-id represents the VLAN ID and ranges from 1 to 4094. &<1-10> indicates you can specify up to 10
VLAN IDs or VLAN ID ranges.