HP E4510-48G, Справочник по командам

Страница: 1198 / 1334

16-21
info-center trapbuffer
Syntax
info-center trapbuffer [ channel { channel - number | channel - name } | size buffersize ] *
undo info-center trapbuffer [ channel | size ]
View
System view
Default Level
2: System level
Parameters
size buffersize : Specifies the maximum number of trap messages in a trap buffer, in the range 0 to
1,024 with 256 as the default value.
channel - number : Specifies a channel number, in the range 0 to 9.
channel - name : Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.
Description
Use the info-center trapbuffer command to enable information output to the trap buffer and set the
corresponding parameters.
Use the undo info-center trapbuffer command to disable information output to the trap buffer.
By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) as the default
channel and a maximum buffer size of 256.
Note that the info - center trapbuffer command takes effect only after the information center is enabled
with the info-center enable command.
Examples
# Configure the system to output information to the trap buffer through the default channel, and set the
trap buffer size to 30.
<Sysname> system-view
[Sysname] info-center trapbuffer size 30
reset logbuffer
Syntax
reset logbuffer
View
User view
Default Level
3: Manage level