HP E4510-48G, Справочник по командам

Страница: 107 / 1334

2-16
Examples
# Assign GigabitEthernet 1/0/1 to aggregation group 22.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-aggregation group 22
reset counters interface
Syntax
reset counters interface [ bridge-aggregation [ interface-number ] ]
View
User view
Default Level
2: System level
Parameters
bridge-aggregation : Clears statistics for Layer 2 aggregate interfaces.
interface-number : Aggregate interface number. If the interface-number argument is not specified, this
command clears statistics of all aggregate interfaces of the specified type.
Description
Use the reset counters interface command to clear the statistics of the specified aggregate interface
or interfaces.
Before collecting statistics for a Layer 2 aggregate interface within a specific period, you need to clear
the existing statistics of the interface.
Note that:
z
If none of the keywords and argument is specified, this command clears the statistics of all
interfaces in the system.
z
If only the bridge-aggregation or route-aggregation keyword is specified, the command clears
the statistics of all Layer 2 aggregate interfaces.
z
If the bridge-aggregation interface-number or route-aggregation interface-number keyword and
argument combination is specified, this command clears the statistics of the specified Layer 2
aggregate interface.
Examples
# Clear the statistics of Layer 2 aggregate interface bridge-aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type
interface-number ] ]