HP E4510-48G, Справочник по командам

Страница: 1057 / 1334

5-23
14: vlan 999
15: #
16: domain system
17: access-limit disable
18: state active
19: idle-cut disable
20: self-service-url disable
21: #
22: interface NULL0
23: #
---- More ----
“ ---- More ----” means that all information on this screen has been displayed, and if you press the
Space key, the next screen will be displayed.
display startup
Syntax
display startup
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display startup command to display the configuration files used at the current system startup
and the configuration file(s) to be used at the next system startup.
Note that:
z
The slaves are started and run based on the current configurations of the master; therefore the
current startup configuration files displayed on all the member devices in a stack are always the
same.
z
After the master is changed, the new master does not restart using the configuration file but runs
with the current configuration instead. Therefore, when you execute the display startup
command, the startup configuration file used for the current startup of the new master is displayed
as NULL and those of the slaves are also NULL to keep consistent with the new master.
Related commands: startup saved-configuration .
Examples
# Display the startup configuration file used at the current system startup and the one to be used at the
next system startup.
<Sysname> display startup
MainBoard: