HP E4510-48G, Справочник по командам

Страница: 1040 / 1334

5-6
Description
Use the execute command to execute the specified batch file.
Batch files are command line files. Executing a batch file is to execute a set of command lines in the
file.
z
You should not include invisible characters in a batch file. If an invisible character is found during
the execution, the batch process will abort and the commands that have been executed cannot be
cancelled.
z
Not every command in a batch file is sure to be executed. For example, if a certain command is
not correctly configured, the system omits this command and goes to the next one.
z
The configuration generated after a batch file is executed will not be backed up to the standby
main board automatically.
z
Each configuration command in a batch file must be a standard configuration command, meaning
that the valid configuration information can be displayed with the display current-configuration
command after this command is configured successfully; otherwise, this command may not be
executed correctly.
Examples
# Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat
file prompt
Syntax
file prompt { alert | quiet }
View
System view
Default Level
3: Manage level
Parameters
alert : Enables the system to warn you about operations that may bring undesirable results such as file
corruption or data loss.
quiet : Disables the system from warning you about any operation.
Description
Use the file prompt command to set a prompt mode for file operations.
By default, the prompt mode is alert .
Note that when the prompt mode is set to quiet , the system does not warn for any file operation. To
avoid undesirable consequences resulting from misoperation, you are recommended to use the alert
mode.
Examples
# Set the file operation prompt mode to alert .