HP E4510-48G, Справочник по командам

Страница: 1031 / 1334

4-29
Examples
# Configure the device to reboot at 12:00 AM (supposing that the current time is 11:43).
<Sysname> schedule reboot at 12:00
Reboot system at 12:00 06/06/2006(in 0 hour(s) and 16 minute(s))
confirm? [Y/N]:
# If you have used the terminal logging command to enable the log display function on the terminal
before setting a reboot time, the system will automatically display related log information after you
enter <y>. By default, the log display function is enabled.
<Sysname>
%Jun 6 11:43:11:629 2006 Sysname CMD/4/REBOOT:
vty0(192.168.1.54): Set schedule reboot parameters at 11:43:11 06/06/2006, and system will
reboot at 12:00 06/06/2006.
schedule reboot delay
Syntax
schedule reboot delay { hh:mm | mm }
undo schedule reboot
View
User view
Default Level
3: Manage level
Parameters
hh:mm : Device reboot wait time, in the format of hh:mm (hours:minutes). The value of the hh argument
ranges from 0 to 720, and the value of the mm argument ranges from 0 to 59, and the value of the
hh:mm argument cannot exceed 720:00.
mm : Device reboot wait time in minutes, in the range of 0 to 43,200.
Description
Use the schedule reboot delay command to enable the scheduled reboot function of all member
devices and set a reboot wait time.
Use the undo schedule reboot command to disable the scheduled reboot function.
By default, the scheduled reboot function is disabled.
Note that:
z
The reboot wait time can be in the format of hh:mm (hours:minutes) or mm (absolute minutes).
The absolute minutes cannot exceed 30 x 24 x 60 minutes, namely, 30 days.
z
The precision of the device timer is 1 minute. One minute before the reboot time, the device will
prompt “REBOOT IN ONE MINUTE” and will be rebooted in one minute.