CLI commands
Local mesh profile context
2-178
Parameters
<master>
Root node that provides the upstream link to the root network that the
other nodes want to reach. The master never tries to connect to any other
node. It waits for links from downstream alternate master or slave nodes. .
<alt-master>
First establishes an upstream link with a master or alternate master node.
Next, operates as a master node waits for links from downstream alternate
master or slave nodes.
<slave>
Can only establish an upstream link with master or alternate master node.
Slave nodes cannot establish downstream links with other nodes.
mesh id
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
mesh id
<id>
Sets the mesh ID.
allowed downtime
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
allowed downtime
<number>
The maximum time (in seconds) that a link can remain idle before the link actually gets deleted.
When a slave (or alternate-master) loses its link to its master, the discovery phase is re-initiated.
minimum snr
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
minimum snr
<number>
(Alternate Master, Slave only) This node will only connect with other nodes whose SNR is above
this setting (in dB).
snr cost per hop
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
snr cost per hop
<number>
(Alternate Master, Slave only) This value is an estimate of the cost of a hop in terms of SNR. It
indicates how much SNR a node is willing to sacrifice in order to connect to node one hop closer
to the root node, because each hop has an impact on performance, especially when using a single
radio.)
initial discovery time
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
initial discovery time
<number>
(Alternate Master, Slave only) Amount of time that will be taken to discover the best available
master node.
The goal of this setting is to delay discovery until all the nodes in the surrounding area have had
time to startup, making the identification of the best master more accurate. If this period is too
short, a slave may connect to the first master it finds, not necessarily the best.
Содержание E-MSM720
