CLI commands
Controlled APs network configuration context
2-153
no inherit country code
Do not inherit settings from parent.
world-mode dot11 country code
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
world-mode dot11 country code
<code>
Specifies the country in which the controller is operating.
Parameters
<code>
An ISO3166 three-letter country code.
New
inherit ipv6 ra conversion
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
inherit ipv6 ra conversion
Inherit IPv6 RA conversion settings from parent.
no inherit ipv6 ra conversion
Do not inherit IPv6 RA conversion settings from parent.
New
ipv6 ra conversion
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ipv6 ra conversion
Enables IPv6 Router Advertisement (RA) multicast conversion which ensures that the controller
properly assigns IP addresses to IPv6 clients according to their VLAN.
no ipv6 ra conversion
Disables IPv6 Router Advertisement (RA) multicast conversion.
New
show ipv6 ra conversion
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
show ipv6 ra conversion
Displays the IPv6 RA conversion state.
sensor server name
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
sensor server name
<name>
Sets the IP address or hostname of the RF Manager Server to connect to.
Parameters
Name
Specify the IP address of the RF Manager Server or its hostname. If a
hostname is specified, the controller must be able to resolve it via
DNS—that is, an entry must be created on the network DNS server that
points to the IP address of the RF Manager Server.
Содержание E-MSM720
