CLI commands
Internet port interface context
2-89
Internet port interface context
Path:
View > Enable > Config > Internet port interface
Use this context to configure the Internet port.
end
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
end
Switches to parent context.
duplex
Supported on: MSM710 E-MSM720 MSM760
duplex (auto | half | full)
Sets the duplex mode on Internet.
Parameters
auto
Lets the controller automatically set duplex mode based on the type of
equipment it is connected to.
half
Forces the port to operate in half duplex mode.
full
Forces the port to operate in full duplex mode.
speed
Supported on: MSM710 E-MSM720 MSM760
speed (auto | 10 | 100)
Sets the speed of the Internet port.
Parameters
auto
Lets the controller automatically set port speed based on the type of
equipment it is connected to.
100
Forces the port to operate at 100 mbps.
10
Forces the port to operate at 10 mbps.
interface vlan
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
interface vlan
<networkname>
Switches to the specified VLAN interface or create a new VLAN interface with the specified VLAN
definition.
no interface vlan
<networkname>
Deletes the specified VLAN.
Содержание E-MSM720
