EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available aComponents, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx driver
T-10
Philiphead screw driver
-
Plier
-
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove cover by removing the screws securing the cover onto the chassis.
2. Disconnect the 6 cables connecting antenna PCA to the main PCA.
3. Remove the 2 radio card by removing the 2 screws on each radio card.
4. Remove the main PCA by removing the 5 screws at the on the main PCA.
5. Using a plier, lossen and unscrew the 6 nuts holding onto the external connectors.
6. Push the connectors out to remove connectors with cables.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
