
6–8
www.hp.com
User Guide
Installing the Bluetooth Mouse as a Stand-Alone Device
Installing the Bluetooth Software
The Bluetooth software is available on the
HP USB Bluetooth
Transceiver 1.2 Software & Documentation
CD included with the
Bluetooth USB transceiver kit.
For the Bluetooth mouse to operate in Bluetooth wireless mode,
you must install Bluetooth drivers. To obtain a user interface for
viewing information about the Bluetooth devices, you must
install the BBCS software.
To obtain the full benefits of Bluetooth wireless mode, install the
following software packages:
■
WIDCOMM Bluetooth software (drivers)
■
Broadcom Bluetooth Control Suite (BBCS)
WIDCOMM Bluetooth Software
The WIDCOMM Bluetooth software package contains Bluetooth
drivers required for operating the Bluetooth mouse in Bluetooth
wireless mode.
✎
It is recommended that you install the WIDCOMM software to
get optimal Bluetooth functionality. However, if you do not want
to install the WIDCOMM software, you can install the Microsoft
Bluetooth drivers instead. Refer to the
section for instructions.
To install the WIDCOMM Bluetooth software:
1. Insert the
HP USB Bluetooth Transceiver 1.2 Software &
Documentation
CD into the computer’s optical drive.
2. Go to
D:\Modular\Bluetooth\WIDCOMM\setup.exe
(where D: is the drive letter of the computer’s optical drive)
Greg Young to verify path
.
3. Double-click the
setup.exe
file.