manualshive.com logo in svg

HP DL760 - ProLiant - 1 GB RAM, Руководство пользователя

Поделиться
Скачать
HP DL760 - ProLiant - 1 GB RAM Скачать руководство пользователя страница 132

Installing Hardware Options, Hot-Pluggable 

Hot-Adding Memory 

For the hot-add feature to work on the ProLiant DL760 G2 server, the operating 
system must have driver support. Refer to “Installing HP Drivers and Utilities” in 
Chapter 8 for details on installing HP software. HP recommends having all DIMMs 
that will be added available before beginning this procedure. 

 

 

CAUTION:

  A redundant memory configuration is required when performing Hot Plug 

RAID Memory functions. 

• 

If all five memory cartridges are online and error free, any memory cartridge can 
be removed. 

• 

If one of the five memory cartridges requires attention, only that memory 
cartridge can be removed. 

• 

If two or more memory cartridges require attention and are online (cartridge 
power LED is illuminated), no cartridge can be removed while the system is 
online. An audible alarm will sound if any cartridge is unlocked. 

 

IMPORTANT:

  The ProLiant DL760 G2 server does not support hot-removal of DIMMs. 

 

IMPORTANT:

  You cannot perform a hot-add of memory if only four memory cartridges are 

installed. The system must have a redundant memory configuration (five cartridges online and 
error free) before the removal of any memory cartridge is permitted. 

HP ProLiant DL760 Generation 2 Server User Guide 

5-17

 

  

HP CONFIDENTIAL

 

Writer: Bryce Miller File Name: f-ch5 Installing Options-Hot Pluggable.doc 

Codename: Comet Part Number: 201264-001 Last Saved On: 6/17/03 9:47 AM 

Содержание DL760 - ProLiant - 1 GB RAM












































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды