5.
Remove the TouchPad (5).
Reverse this procedure to install the TouchPad.
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided adhesive)
909636-001
Before removing the RTC battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
46
Chapter 5 Removal and replacement procedures
Содержание CTO 13t-ab000
Страница 4: ...iv Safety warning notice ...
Страница 7: ...11 Recycling 66 Index 67 vii ...
Страница 8: ...viii ...
Страница 23: ...Computer major components Computer major components 15 ...