HP Compaq dx7300, Справочное руководство

Страница: 12 / 234

2–2 433611-001 Service Reference Guide, dx7300
Setup Utilities and Diagnostics Features
2.2 Computer Setup Utilities
Use Computer Setup Utilities (F10) to:
■
Change factory default settings.
■
Set the system date and time.
■
Set, view, change, or verify the system configuration, including settings for processor,
graphics, memory, audio, storage, communications, and input devices.
■
Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives,
or USB flash media devices.
■
Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests
run during a Full Boot. You can set the system to:
❏
always Quick Boot (default);
❏
periodically Full Boot (from every 1 to 30 days); or
❏
always Full Boot.
■
Select Post Messages Enabled or Disabled to change the display status of Power-On
Self-Test (POST) messages. Post Messages Disabled suppresses most POST messages, such
as memory count, product name, and other non-error text messages. If a POST error occurs,
the error is displayed regardless of the mode selected. To manually switch to Post Messages
Enabled during POST, press any key (except
F1
through
F12
).
■
Establish an Ownership Tag, the text of which is displayed each time the system is turned on
or restarted.
■
Enter the Asset Tag or property identification number assigned by the company to this
computer.
■
Enable the power-on password prompt during system restarts (warm boots) as well as during
power-on.
■
Establish a setup password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
■
Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or
embedded NIC, so that they cannot be used until they are unsecured.
■
Enable or disable removable media boot ability.
■
Enable or disable legacy diskette write ability (when supported by hardware).
■
Solve system configuration errors detected but not automatically fixed during the Power-On
Self-Test (POST).
■
Replicate the system setup by saving system configuration information on diskette and
restoring it on one or more computers.
■
Execute self-tests on a specified ATA hard drive (when supported by drive).
■
Enable or disable DriveLock security (when supported by drive).