HP Chromebook x360 14a Скачать руководство пользователя страница 38

Страница: 38 / 70

NOTE:

The connector board high-speed cable is available as spare part number M15294-001. The connector

board low-speed cable is available as spare part number M15293-001.

Before removing the connector board cables, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 26

Remove the bottom cover (

Bottom cover on page 26

Disconnect the battery cable from the system board (see

Battery on page 27

Remove the connector board cables:

Release the zero insertion force (ZIF) connectors (1) to which the connector board cables are connected,
and then disconnect the cables from the system board.

Release the ZIF connectors (2) to which the connector board cables are connected, and then disconnect the
cables from the connector board.

Remove the connector board high-power cable (3) and the connector board low-power cable (4).

To replace the connector board cables, reverse the removal procedures.

Connector board

To remove the connector board, use this procedure and illustration.

Table 5-5

Connector board description and part number

Description

Spare part number

Connector board

M15292-001

NOTE:

The connector board high-speed cable is available using spare part number M15294-001. The connector board low-speed cable

is available using spare part number M15293-001.

Before removing the connector board, follow these steps:

Chapter 5 Removal and replacement procedures for authorized service provider parts

ENWW

Содержание Chromebook x360 14a







































































Результаты поиска

Содержание Chromebook x360 14a

Отзывы:

Похожие инструкции для Chromebook x360 14a

Бренды по названию

Популярные бренды

HP Chromebook x360 14a, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Chromebook x360 14a

Отзывы:

Похожие инструкции для Chromebook x360 14a

Бренды по названию

Популярные бренды