
10.
Slide the system board (3) up and to the left at an angle to remove it.
NOTE:
When removing the system board, make note of the location of the I/O bracket (4).
The I/O bracket is available using spare part number M45808-001.
Reverse this procedure to install the system board.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-7
Heat sink descriptions and part numbers
Description
Spare part
number
Heat sink (includes replacement thermal material)
M44241-001
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 28
2.
Remove the top cover/keyboard (
3.
Disconnect the battery cable from the heat sink (
).
4.
Remove the system board (
Remove the heat sink:
1.
Turn the system board upside down with the front toward you.
2.
Remove the two Phillips M2.0 × 2.0 broad head screws (1) that secure the heat sink to the system board.
ENWW
Component replacement procedures
39
Содержание Chromebook 11MK G9 EE
