•
Community Name — a string used to match the SNMP management station and device. It
must be set to the same name on both the management station and the Autoloader. The default
community name is public.
•
SNMP Trap Notification Filter — the types of events for which the device should send SNMP
traps.
•
IPv4 or IPv6 Management Station — IP address of the Command View TL management station.
Only one management station can be configured. If both IPv4 and IPv6 IP addresses are
provided, only the IPv4 address will be used
Configuring HP Systems Insight Manager for the Tape Autoloader
The Autoloader uses the HP NetCitizen MIB, which is supported by HP Systems Insight Manager
(SIM) and many other applications. To detect the Tape Autoloader using a remote management
application, such as HP SIM, you must first add the IP address for the management system as an
SNMP target using the network configuration. SNMP queries are only accepted from configured
targets.
To configure the Autoloader for use with HP SIM:
1.
From the RMI, add the HP SIM management station as an SNMP target.
2.
If the Autoloader IP address is in an HP SIM automatic discovery IP address list, the SIM
management station will detect the Autoloader at the next scheduled scan.
To configure HP SIM for manual discovery:
1.
In the HP SIM toolbar, click
Options > Discovery
.
2.
Click the
Manual
tab.
3.
Enter the Autoloader's IP address or system name.
SIM 5.1 will automatically detect the system type and product name.
To manually identify the Autoloader with SIM 5.0 and older:
1.
In the HP SIM
System and Event Collections
pane, click
Systems by Type
.
2.
In the
Systems by Type
pane, click
All systems
.
3.
Click the link with the IP address or name of the Tape Autoloader.
4.
Click the
Tools & Links
tab.
5.
Click
Edit System Properties
.
6.
Set
System Type
to
Tape Library
.
7.
Enter the
Product Model
of your Tape Autoloader.
8.
Click
OK
.
Changing the administrator password
Use the
to change the administrator password for the RMI and
OCP.
NOTE:
You must set the administrator password with the OCP before you can access administrator
functionality in the RMI. See
Changing the administrator password (Configuration > Change Admin
54
Operating the Tape Autoloader
Содержание BL536A
