HP BL460c - ProLiant - G5, Руководство по техническому обслуживанию и ремонту

Страница: 33 / 64

Removal and replacement procedures 33
8.
Remove the release button.
To replace the component, reverse the removal procedure.
Heatsink
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
To remove the component:
1.
Power down the server blade (on page 22 ).
2.
Remove the server blade (on page 22 ).
3.
Remove the access panel (" Access panel " on page 23 ).
4.
Remove all hard drives (" Hard drive " on page 24 ).
5.
Remove all hard drive blanks (" Hard drive blank " on page 23 ).
6.
Remove the hard drive backplane (" Hard drive backplane " on page 26 ).
7.
Remove the front panel/hard drive cage assembly (" Front panel/hard drive cage assembly " on
page 27 ).