Accessing MAC address views and searches (CLI)
Syntax:
show mac-address
[vlan <
vlan-id>
]
[
<port-list>
]
[<
mac-addr
>]
Listing all learned MAC addresses on the switch, with the port number on which each
MAC address was learned
Switch# show mac-address
Listing all learned MAC addresses on one or more ports, with their corresponding port
numbers
For example, to list the learned MAC address on ports A1 through A4 and port A6:
Switch# show mac-address a1-a4,a6
Listing all learned MAC addresses on a VLAN, with their port numbers
This command lists the MAC addresses associated with the ports for a given VLAN. For Example:
Switch# show mac-address vlan 100
NOTE:
The switches operate with a multiple forwarding database architecture.
Finding the port on which the switch learned a specific MAC address
For example, to find the port on which the switch learns a MAC address of 080009-21ae84:
Accessing MSTP Data (CLI)
Syntax:
show spanning-tree
Displays the switch's global and regional spanning-tree status, plus the per-port spanning-tree operation at the
regional level.
Values for the following parameters appear only for ports connected to active devices:
Designated Bridge
,
Hello Time
,
PtP
, and
Edge
.
388
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
