TFTP
A destination directory and files can be created for all crash files (core-dump, crash-data, crash-log, fdr-log,
and event-log) on an TFTP server (with write permissions).
SFTP
Files are auto created on the SFTP server as a secured transfer. The destination directories however can be
manually created on the server.
NOTE:
Specified directories can be used for the TFTP/SFTP transfers in the
copy
command. If the
directory is specified, all files will be copied under one directory, otherwise all files will be copied to
the TFTP/SFTP server home directory. It is mandatory to specify the directory name.
Single copy command
Syntax
copy
source
destination
options
Copy data files to and from the switch.
Source
Specify the source of data using any of the following destinations.
Destination
Operation note
Flash
n/a
SFTP
For transfer of crash-files via SFTP, the destination directory must exist on the SFTP
server with write permissions.
File creation is not mandatory as files are automatically created with the chassis serial
number suffix to the filename when using SFTP.
TFTP
For transfer of crash-files via TFTP, the destination directory along with the file names
(core-dump, crash-data, crash-log, fdr-log, and event-log) must exist on the TFTP
server with write permissions.
Xmodem
n/a
Data Files
Specify the data file to be copied from the source.
Data file
Operation note
command-output
command
Specify a command to copy output.
When using
command-output
, place the desired CLI command in double-quotes. For
example: "show system".
config
file-
name
Copy named configuration file.
The
file-name
option is the source configuration file being copied.
Table Continued
364
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
