To download a software file from primary flash in a switch with an IP address of 10.29.227.103 to the primary flash
in the destination switch, you would execute the following command in the destination switch's CLI:
Switch-to-switch, from primary in source to either flash in destination
switch# copy tftp flash 10.29.227.13 flash
Device will be rebooted, do you want to continue [y/n]? y
00107K
1
1
Running Total of Bytes Downloaded
Downloading from either flash in the source switch to either flash in the destination
switch (CLI)
Syntax:
copy tftp flash <
ip-addr
> {</os/primary> | </os/secondary>} [primary | secondary]
This command (executed in the destination switch) gives you the most options for downloading between switches.
If you do not specify either a primary or secondary flash location for the destination, the download automatically
goes to primary flash.
To download a software file from secondary flash in a switch with an IP address of 10.28.227.103 to the
secondary flash in a destination switch, you would execute the following command in the destination switch's CLI:
Switch-to-switch, from either flash in source to either flash in destination
switch# copy tftp flash 10.29.227.13 flash /os/secondary secondary
Device will be rebooted, do you want to continue [y/n]? y
00184K
Using AirWave to update switch software
AirWave can be used to update switch products. For further information, refer to the
ZTP with Airwave network
Management
chapter in this manual.
Using IMC to update switch software
IMC includes a software update utility for updating on switch products. For further information, refer to the getting
started guide and the administrator’s guide, provided electronically with the application.
Copying software images
NOTE:
For details on how switch memory operates, including primary and secondary flash, see “Switch
Memory and Configuration” in the basic operation guide for your switch.
TFTP: Copying a software image to a remote host (CLI)
Syntax:
copy flash tftp <
ip-addr
> <
filename
>
Copies the primary flash image to a TFTP server.
Example:
356
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
