HP Apollo 4200 Gen9 Скачать руководство пользователя

Страница: 162 / 193

Software and configuration utilities 162

Embedded Diagnostics option

The system BIOS in all ProLiant Gen9 servers includes an Embedded Diagnostics option in the ROM.

The Embedded Diagnostics option can run comprehensive diagnostics of the server hardware, including

processors, memory, drives, and other server components.
For more information on the Embedded Diagnostics option, see the

HPE UEFI System Utilities User

Guide for HPE ProLiant Gen9 Servers

on the Hewlett Packard Enterprise website

(

http://www.hpe.com/info/uefi/docs

RESTful API support for UEFI

The ProLiant Gen9 servers include support for a UEFI compliant System BIOS, along with UEFI System

Utilities and Embedded UEFI Shell pre-boot environments. ProLiant Gen9 servers also support

configuring the UEFI BIOS settings using the RESTful API, a management interface that server

management tools can use to perform configuration, inventory, and monitoring of a ProLiant server. The

RESTful API uses basic HTTPS operations (GET, PUT, POST, DELETE, and PATCH) to submit or return

JSON-formatted data with iLO web server.
For more information about the RESTful API and the RESTful Interface Tool, see the Hewlett Packard

Enterprise website (

http://www.hpe.com/info/restfulinterface/docs

Re-entering the server serial number and product ID

After you replace the system board, you must re-enter the server serial number and the product ID.

During the server startup sequence, press the

key to access UEFI System Utilities.

Select the

System Configuration

BIOS/Platform Configuration (RBSU)

Advanced Options

Advanced System ROM Options

Serial Number

, and then press the

Enter

key.

Enter the serial number and press the

Enter

key. The following message appears:

The serial number should only be modified by qualified service personnel.

This value should always match the serial number located on the chassis.

Press the

Enter

key to clear the warning.

Enter the serial number and press the

Enter

key.

Select

Product ID

. The following warning appears:

Warning: The Product ID should ONLY be modified by qualified service

personnel. This value should always match the Product ID located on the

chassis.

Enter the product ID and press the

Enter

key.

Press the

F10

key to confirm exiting System Utilities. The server automatically reboots.

Utilities and features

HPE Smart Storage Administrator

The HPE SSA is a configuration and management tool for HPE Smart Array controllers. Starting with HPE

ProLiant Gen8 servers, HPE SSA replaces ACU with an enhanced GUI and additional configuration

features.
The HPE SSA exists in three interface formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA

Scripting. Although all formats provide support for configuration tasks, some of the advanced tasks are

available in only one format.
Some HPE SSA features include the following:

Содержание Apollo 4200 Gen9


































































































































































































Результаты поиска

Содержание Apollo 4200 Gen9

Отзывы:

Похожие инструкции для Apollo 4200 Gen9

Бренды по названию

Популярные бренды

HP Apollo 4200 Gen9, Руководство пользователя

Результаты поиска

Содержание Apollo 4200 Gen9

Отзывы:

Похожие инструкции для Apollo 4200 Gen9

Бренды по названию

Популярные бренды