1.
Access the System ROM Flash Binary component for your node from the
. When searching for the component, always select
OS Independent
to locate
the binary file.
2.
Copy the binary file to a USB media or iLO virtual media.
3.
Attach the media to the node .
4.
Boot to Embedded Shell.
5.
To obtain the assigned file system volume for the USB key, enter the
Map –r
command.
For more information about accessing a file system from the shell, see the UEFI Shell user guide on the
Hewlett Packard Enterprise website
.
6.
Change to the file system that contains the System ROM Flash Binary component for your node . Enter
one of the
fsx
file systems available, such as
fs0
or
fs1
, and press the
Enter
key.
7.
Use the
cd
command to change from the current directory to the directory that contains the binary file.
8.
Enter the
fwupdate –d BIOS -f <filename>
command to flash the system ROM.
For help on the FWUPDATE command, enter the following command:
help fwupdate -b
9.
Reboot the node .
A reboot is required after the firmware update for the updates to take effect, and for hardware stability to
be maintained.
For more information about the commands used in this procedure, see the UEFI Shell user guide on the
Hewlett Packard Enterprise website
.
Firmware Update application in the UEFI System Utilities
For systems configured in either boot mode, update the firmware:
1.
Access the System ROM Flash Binary component for your node from the
. When searching for the component, always select
Cross operating system
to
locate the binary file.
2.
Copy the binary file to a USB media or iLO virtual media.
3.
Attach the media to the node .
4.
During POST, press
F9
to enter System Utilities.
5.
Select
Embedded Applications
-
Firmware Update
-
System ROM
-
Select Firmware File
.
6.
Select the device containing the flash file.
7.
Select the flash file. This step may take a few moments to complete.
8.
Select
Start firmware update
and allow the process to complete.
9.
Reboot the node . A reboot is required after the firmware update for the updates to take effect and for
hardware stability to be maintained.
Online Flash components
This component provides updated system firmware that can be installed directly on supported operating
systems. Additionally, when used in conjunction with SUM, this Smart Component allows the user to update
firmware on remote servers from a central location. This remote deployment capability eliminates the need for
the user to be physically present at the server to perform a firmware update.
Drivers
IMPORTANT:
Always perform a backup before installing or updating device drivers.
The node includes new hardware that may not have driver support on all OS installation media.
Firmware Update application in the UEFI System Utilities
185
Содержание Apollo 2000 System
Страница 50: ... 1U left rear I O blank 2U rear I O blank 50 Operations ...
Страница 123: ... AMD FirePro S9150 GPU NVIDIA Quadro K4200 GPU or NVIDIA Quadro M4000 GPU Hardware options installation 123 ...
Страница 130: ... AMD FirePro S9150 GPU 11 Install Accelerator 1 into slot 3 AMD FirePro S7150 GPU 130 Hardware options installation ...
Страница 134: ...AMD FirePro S9150 19 Install Accelerator 2 into slot 4 AMD FirePro S7150 GPU 134 Hardware options installation ...
