manualshive.com logo in svg

HP Apollo 2000 System, Руководство пользователя, Страница: 106 / 203

Поделиться
Скачать
HP Apollo 2000 System Скачать руководство пользователя страница 106

Installing the expansion board

About this task

Determine if there are thermal requirements for the option. For a list of options that have thermal limitations,
see "

Thermal limitations

."

To install the component:

Procedure

1.

Power down the node

.

2.

Disconnect all peripheral cables from the node.

3.

Remove the node from the chassis

.

4.

Place the node on a flat, level surface.

5.

Remove the PCI riser cage

.

6.

Identify the PCIe slot compatible with the new option, and then remove the PCI blank opposite that slot.

7.

Connect any required cables to the expansion board.

8.

Install the expansion board into the riser cage assembly and secure it to the riser cage with one T-15
screw.

• Slot 1 of the single-slot left PCI riser cage assembly

• Slot 1 of the single-slot 2U node PCI riser cage assembly

106

 Installing the expansion board

Содержание Apollo 2000 System












































































































































































































Отзывы:

Нет отзывов