Installing and Configuring the Core Switch 2/64
46
Core Switch 2/64 V4.1 Installation Guide
4. Position the pallet so that the bottom of the chassis is level with the
installation surface.
5. If the chassis is on a pallet jack or lift, stabilize the pallet jack or lift to prevent
it from moving during the transfer.
WARNING:
A fully populated StorageWorks 14U chassis weighs
approximately 250 lbs (113 kg) and requires a minimum of two people to
safely slide it from one surface to another.
Installing the Core Switch 2/64 on a Flat Surface
Use these steps to install the Core Switch 2/64 on a flat surface.
Note:
The Core Switch 2/64 must be placed on a stable, flat surface, with the blower
side of the chassis having access to cool air. Orient the switch so that the port side
faces the service aisle.
1. Remove the switch chassis door, if you have not already done so.
2. Place the Core Switch 2/64 on a flat, sturdy surface like a table or lab bench.
3. Connect the two power cables to the power supply inlets on the switch.
Note:
It is recommended to power the switch using two separate power sources,
ensuring redundancy.
4. Connect the two power cables to corresponding power outlets. Make sure that
the power cable is routed so that it is not exposed to stress.
5. Turn on power to the switch. The switch automatically runs a Power On Self
Test (POST).
Note:
Do not connect the switch to the network until the IP address is correctly set. For
instructions on how to set the IP address, see
Содержание AA-RS2WC-TE
