HP 8924E, Сборка

Страница: 150 / 640

150
Chapter 5, HP 8924C Performance Verification
Verifying Performance
N:\mkt\MANUALS\HP8924C\ALR\24c_pt.fb
Verifying Performance
Test Set Operation
You need to know basic Test Set operation to perform these test procedures (refer
to the User’s Guide). You should be familiar with the front-panel controls and the
use of the control screens. You need to be able to operate the Test Set’s RF
Generator, RF Analyzer, AF Generators, AF Analyzer, and Oscilloscope.
NOTE: Periodic adjustments should always be performed before verifying instrument performance.
See "Periodic Adjustments" on page 137 .
PRESET BEFORE
EACH TEST
Press PRESET on the Test Set before beginning each test to return the
controls to a known state.
Equipment
To perform all tests you will need the equipment described in
Table 7
. Equipment
for individual tests is shown in the test setup drawings. Alternative test equipment
can be used if specifications are equal to those listed in the Hewlett-Packard Test
and Measurement Catalog for each HP model. If you just need to verify operation,
rather than verify specified performance, you can use the test procedures with
functionally equivalent equipment.