HP 780019-S01, Руководство по техническому обслуживанию и ремонту

Страница: 46 / 105

Removal and replacement procedures 46
9.
Remove the Express bay bridge card from slot 1.
10.
Loosen the three screws, then remove the drive cage assembly.
To replace the component, reverse the removal procedure.
4LFF hard drive backplane
To remove the component:
1.
Power down the server (on page 16 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 17 ).
o
Remove the server from the rack (on page 17 ).
4.
Remove the access panel (" Access panel " on page 26 ).