HP 780019-S01, Руководство по техническому обслуживанию и ремонту

Страница: 41 / 105

Removal and replacement procedures 41
8.
Remove the location discovery services ear.
To replace the component, reverse the removal procedure.
2SFF SAS/SATA drive cage assembly option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
1.
Back up all server data.
2.
Power down the server (on page 16 ).
3.
Do one of the following:
o
Extend the server from the rack (on page 17 ).
o
Remove the server from the rack (on page 17 ).
4.
Remove the access panel (" Access panel " on page 26 ).