HP 780019-S01, Руководство по техническому обслуживанию и ремонту

Страница: 34 / 105

Removal and replacement procedures 34
3.
Remove the fan blank.
To replace the component, reverse the removal procedure.
8SFF Optical/USB/VGA assembly
To remove the component:
1.
Power down the server (on page 16 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 17 ).
o
Remove the server from the rack (on page 17 ).
4.
Remove the access panel (" Access panel " on page 26 ).
5.
Disconnect the optical drive cable.