Removal and replacement procedures 31
5.
Lift the rear wall latch.
6.
Remove the secondary PCIe riser blank.
To replace the component, reverse the removal procedure.
GPU riser and cable option
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
1.
Back up all server data.
2.
Power down the server (on page
3.
Do one of the following:
o
