HP 780019-S01, Руководство по техническому обслуживанию и ремонту

Страница: 28 / 105

Removal and replacement procedures 28
7.
Remove the PCIe riser board.
To replace the component, reverse the removal procedure.
Secondary PCI riser cage
CAUTION: To prevent damage to the server or expansion boards, power down the server
and remove all AC power cords before removing or installing the PCI riser cage.
1.
Power down the server (on page 16 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 17 ).
o
Remove the server from the rack (on page 17 ).
4.
Remove the access panel (" Access panel " on page 26 ).