HP 742n - Pavilion - 512 MB RAM, Руководство пользователя

Страница: 34 / 144

30
hp pavilion home pc
Filename: ma1rwtc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc.
Revision #: 161 Page: 30 of 46 Printed: 04/26/01 09:20 AM
Warning: Failure to set the modem, and
any communication software used with
the modem, to the values contained in the
listing will result in the modem being
operated in a non-compliant manner.
Consequently, there would be no permit in
force for this equipment, and the
Telecommunications Act 1991 prescribes a
penalty of A$12,000 for the connection of
non-permitted equipment.
Australia/New Zealand Telecom
Statement
Your modem has been granted an Austel Permit for use in
Australia and a New Zealand Telecom Telepermit for use in
New Zealand. In each country, special conditions apply to
the settings and features of your modem. Failure to observe
these conditions might result in heavy penalties being
applied (up to A$12,000.00 in Australia).
Warning: For safety reasons, only connect
equipment with a telecommunications
compliance label. This includes customer
equipment previously labeled, permitted
or certified.
The grant of a Permit/Telepermit in no way indicates the
telecom agency’s acceptance of responsibility for the correct
operation of that device under all operating conditions. In
particular, the higher speeds at which this modem is
capable of operating depend on a specific network
implementation which is only one of many ways of
delivering high-quality voice telephone to customers. Failure
to operate should not be reported as a fault to Telecom or
Austel.
In addition to satisfactory line conditions, a modem can
work properly only if:
3
It is compatible with the modem at the other end of the
call, and
3
The application using the modem is compatible with the
application at the other end of the call; for example,
accessing the Internet requires suitable software in
addition to a modem.
This equipment shall not be used in any manner which could
constitute a nuisance to other customers.
The setting and features discussed below influence how your
modem reacts with the telephone network. If changes from
the default values are made, then it is possible that
unwanted signals or interference may be generated, your
modem might dial wrong numbers or suffer from a reduced
level of performance. We strongly recommend that the
settings are not changed under any circumstances or the
Permit/Telepermit may become invalid.