HP 6400cl, Руководство по управлению, Страница: 396 / 664

Access Control Lists (ACLs) for the Series 5300xl Switches
Displaying ACL Data
Display the ACL Assignments for a VLAN
This command briefly lists the identification and type(s) of ACLs currently
assigned to a particular VLAN in the running-config file. (The switch allows
up to two ACL assignments per VLAN; one inbound and one outbound.)
Syntax:
show access-list vlan < vid >
List the ACLs assigned to a VLAN in the running config file.
N o t e
This information also appears in the
show running
display. If you executed
write
memory
after configuring an ACL, it appears in the
show config
display.
For example, if you assigned a standard ACL with an ACL-ID of “1” to filter
inbound traffic on VLAN 10, you could quickly verify this assignment as
follows:
Indicates that:
• A standard ACL with the ID of “1”
is assigned to filter inbound traffic
on VLAN 10.
• There is no ACL assignment to
filter outbound traffic on VLAN 10.
Figure 9-19. Example of Listing the ACL Assignments for a VLAN
9-50