Hinge cover
Description
Spare part number
Hinge Kit for 14" products
840684-001
Hinge Kit for 15" products
840737-001
Hinge cover for 14" products
840685-001
Hinge cover for 15" products
840738-001
Hinge cover for 14" products with a touch screen
840686-001
Hinge cover for 15" products with a touch screen
840739-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal and
replacement
Before removing the hinge covers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service door (see
b.
Remove the battery (see
c.
Hard drive (see
).
d.
Solid-state drive (see
Solid-state drive (select products only) on page 41
).
e.
WWAN module (see
WWAN module (select products only) on page 42
f.
WLAN module (see
g.
Optical drive (see
h.
Keyboard (see
).
i.
Memory (see
Remove the hinge covers:
▲
Remove the 2 M2x5L P1 screws (1), and then remove the hinge covers (2).
Component replacement procedures
53
Содержание 640 ProBook G3 Series
