erase
OVERVIEW
Switch Management
Category:
manager
Primary context:
the section called “config” (page 540)
Related Commands
the section called “port-access” (page 577)
Usage: erase <startup-config |
flash <primary|secondary> |
config FILENAME |
core-dump FILENAME>
Description: Erase stored files.
Parameters:
o startup-config - erase the configuration file loaded
at the most recent boot.
This will cause an immediate
reboot with a factory-default configuration.
o flash <primary|secondary> - erase the specified software image.
o config FILENAME - erase the specified configuration file.
If
the config file erased is the one loaded at the most
recent boot, this will cause an immediate reboot with
a factory-default configuration.
o core-dump FILENAME - erase the specified core-dump file.
specify the core-dump file as displayed with
'show boot-history'
NOTES
Italicized "config" Keywords
The italicized "config | config1" keywords correspond to the names selected for the config
files.
COMMAND STRUCTURE
■
erase
< config | config1 > -- Erase the named configuration file
■
erase
-- Erase the named core file (ASCII-STR)
■
erase
< primary | secondary > -- Erase the primary or secondary flash image
■
erase
-- Erase configuration file.
EXAMPLES
Example: erase startup-config
Erase the configuration file used at startup and reset the device to its factory-default configuration:
ProCurve(config)# erase startup-config
Configuration will be deleted and device rebooted, continue [y/n]?
COMMAND DETAILS
174
©
2009 Hewlett-Packard Development Company, L.P.
Содержание 6200YL
